|
|
Warranty: 1 Year USA Manufacturers | Condition: Brand New & Factory Fresh | Stock: Usually Ships in 1 Business Day |
|
|
Description: |
Operates in combination with Nikon's built-in SLR speedlights providing increased Power H138 Easy two-light on camera TTL flash system - SB-50DX in bounce position and built-in speedlight operating with TTL precision Wireless Slave Flash with TTL Auto Control Minus 18 degree tilt position of SB-50DX accommodates AF Nikkor lenses engaged in close-up to a mere 11.8 inches 3D Multi-Sensor Balanced Fill-Flash TECHNICAL SPECIFICATION: Type of speedlight: TL auto flash speedlight with built-in AF Illuminator Guide Number: 72 in feet at ISO 100 when used as accessory. Guide Number: 82 when used in combination with built-in speedlight on N65 or N80. Bounce capability: Flash head tilts up to 90° or down to minus 18° with click stops at 90°, 75°, 50°, 0° and -18° Flash exposure control: 3D Multi-Sensor Balanced Fill-Flash for D1: Includes 3D Multi-Sensor Balanced Fill-Flash for D1, Multi-Sensor Balanced Fill-Flash for D1, Center weighted Fill-Flash for D1 or Standard TTL for D1; specific function employed depends on the lens in use. Automatic Balanced Fill-Flash with TTL Multi-Sensor: 3D Multi-Sensor Balanced Fill-Flash, Matrix Balanced Fill-Flash, Center Weighted Fill-Flash/Spot Fill-Flash, Manual Power Mode for F5, F100, N90s, N80 or N65. Slow and Rear Curtain Sync: Controlled from camera position. Camera sets exposure from 30 seconds to highest sync speed to balance Flash Output Compensation: +3 EV to -3 EV in 1/3 EV steps Wireless Control : Can be used off camera with TTL control to approx. 20 feet. Up to approx.120 feet in manual mode Ready Light: Lights up when SB-50Dx is charged and ready to fire, Blinks when flash fires at its maximum output, indicating light may have been insufficient (in TTL auto flash mode) Wide Flash Adapter: Allows the SB-50DX to be used with lenses as wide as 14mm Flash Output Compensation, Flash Zoom Head Position, Audible Alert Warning, No AF-Illuminator, AM, Slave Function IR Filter: Supplied filter enables SB-50DX to be used as a remote commander Light Sensor: Senses light received from the master flash unit in wireless mult+L23iple flash operation. Wireless Auto Slave Flash Mode has an effective range of approximately 23 feet. Wireless Manual Slave Flash Mode has an effective range of approximately 131 feet. Power Source: Two CR 123A Lithium batteries Number of flashes per set of batteries: Approx. 260 flashes in manual mode Dimensions: (W x H x D) 2.5 x 4.2 x 4.1 in. Weight: Approx. 8.3 oz.
|
To report an error or provide feedback about this product information, please click here. |
|
|
|